Technical Content: Multi Micronutrients
Multiplex Plant Aid contains mixture of, Indole Acetic Acid (IAA), Indole Butyricacid (IBA), Gibberlic acid (GA3) and Alpha Napthyl Acetic acid which are rootgrowth hormones and hence stimulates profuse root growth. It increases the rootlength, branching and density of root hairs.
Dosage:
• For Root Dipping: Dissolve 1 gram of Multiplex Plant Aid in one liter of waterand dip the cuttings for 30 minutes before planting.• For Nursery Beds: Dissolve 1 gram of Multiplex Plant Aid in one liter of waterand drench the solution on the nursery bed.• Drip Irrigation: Dissolve 100 to 200 grams in 200 liters of water and feed theplot through drip for one acre.
Product Description
Multiplex Kranti is a complete plant food that contains all essential Major nutrients like N,P,K, Secondary Nutrient Ca, Mg, S and multi-micronutrients like Zinc, Manganese, Iron, Copper, Boron & Molybdenum in balanced quantity.
Benefits
Multiplex Kranti increases the initial vigor of plants and induces resistance to disease & pests.
It helps plants to resist environmental stress in a better way, improves significantly the growth, yield and quality of the produce.
Remarkable visual impact can be seen within 6.7 days after the spray.
Multiplex kranti is compatible with most of the pesticides, fungicides and fertilizers that are commonly used.
Mode of Application: Foliar Spray / or Drip Irrigation
Target Crop - All Crops
Dosage: Multiplex Kranti can be used for both Foliar and Drip Irrigation
For Foliar spray - use Multiplex Kranti , 2 ml per liter of water
NOTE - For better result it is advisable to use suitable wetting and dispersing agent like Multiplex Maxiwet 1.0 ml per litre of spray solution of Multiplex Kranti
Product Description: Multiplex Nisarga Contains Trichoderma Viride and Acts as a Bio Fungicide. It Controls seeds and soil-borne diseases like root rot, damping-off, fungal wilts, etc occurring in vegetables, fruit crops, field crops, pulses and plantation crops. Multiplex Nisarga also effectively controls Ganoderma wilts in Arecanuts and Coconuts.
Technical Content : Multiplex Nisarga Liquid contains Trichoderma viride 1.5% w.p / Trichoderma viride 5% L.F (Min. 2x106 CFU/ml for Liquid Based & min. 2x106 CFU /gm for Carrier Based)
Mode of Action: Multiplex Nisarga is a Bio Fungicide, which contains Trichoderma Viride in powder form. Nisarga is a potential fungal bioagent can also suppress other pathogenic fungi by means of antibiosis (Suppression by means of secondary metabolites) and competition for nutrients. Multiplex Nisarga secretes Cellulase and Chitinase enzymes which destroy the cell wall of the disease-causing pathogenic fungi or bacteria resulting in suppression of pathogenic load.
Target Disease - root/collar/ stem rot, damping off, wilt & blight diseases
Target crop - Vegetable crops, fruit crops, field crops, pulses and plantation crops.
Dosage -
Foliar application: Dissolve @ 1ML or 3G of Multiplex Nisarga in one litre of water and spray on both sides of leaf during evening hours.Soil application: Mix @ 100 ml or 1 – 2KG of Multiplex Nisarga in 100KG of FYM or Multiplex Annapurna and broadcast on one acre.
Product Description
PI Biovita is a natural biostimulant that contains a concentrated extract of seaweed. It is a foliar-applied product that can be used on a variety of crops, including fruit trees, vegetables, and field crops. it helps to improve plant growth and development, and it can also help to increase crop yields.
Technical Composition
It is a liquid formulation that contains seaweed extract. The seaweed extract in Biovita is a complete and balanced mixture of nutrients, including amino acids, vitamins, minerals, and growth hormones.Thus it acts as a plant growth regulator
Mode of Action
PI Biovita works by stimulating the plant's natural growth processes. The nutrients in Biovita help to increase the plant's ability to absorb water and nutrients, and they also help to improve the plant's resistance to stress. it can also help to improve the quality of the crop, and it can increase the shelf life of the produce.
Features
Improves plant growth and development
Increases crop yields
Improves the quality of the crop
Increases the shelf life of the produce
Helps to improve the plant's resistance to stress
Is a natural product that is derived from seaweed
Is safe to use on food crops
Provides over 60 naturally occurring major and minor nutrients and plant development substances comprising of enzymes, proteins, cytokinins, amino acids, vitamins, gibberellins, auxins, betains etc. in organic form
Benefits
Increased yields: It can help to increase crop yields by up to 20%.
Improved quality of produce: It can help to improve the quality of produce by making it more flavorful, nutritious, and visually appealing.
Longer shelf life: It can help to increase the shelf life of produce by making it less susceptible to spoilage.
Increased resistance to stress: it can help to increase the plant's resistance to stress, such as drought, heat, and pests.
Improved plant health: It can help to improve the overall health of the plant, making it more resistant to disease and pests and other biological disorder.
Reduced the need for fertilizers and pesticides: it also helps to reduce the requirement of chemical fertilizers, making it a more sustainable choice for crop production.
Dosage
The dosage of PI Biovita will vary depending on the crop and the application method. For foliar application, the recommended dosage is 2-3 mL per liter of water. For irrigation, the recommended dosage is 1-2 L per hectare.
Targeted Disease
Biovita is not a disease control product. However, it can help to improve the plant's resistance to stress, which can make the plant less susceptible to disease.
Target Crops
Biovita can be used on a variety of crops, including:
Fruit trees – Apple, Guvava,Mango,banana,coconut
Vegetables – Tomato, Chili, Cauliflower,Capsicum,Pumpkin
Field crops – Cotton,Soyabean,Paddy,Wheat,Groundnut
Ornamentals – Roses, Chrysanthemum
Compatibility - Compatible with sticking agents
Manufacturing Or Marketing Company – PI Industries Ltd.
Mode Of Formulation – Emulsified
Mobility In Plant - Systemic
Application Method Direction Of Use- Foliage Spraying
Multiplex Nisarga contains Trichoderma viride 1.5% w.p / Trichoderma viride 5% L.F (Min. 2x106 CFU/ml for Liquid Based & min. 2x106 CFU /gm for Carrier Based) in powder form
Mode of Action: Multiplex Nisarga is a Bio Fungicide, which contains Trichoderma Viride in liquid form. Nisarga is a potential fungal bioagent can also suppress other pathogenic fungi by means of antibiosis (Suppression by means of secondary metabolites) and competition for nutrients. Multiplex Nisarga secretes Cellulase and Chitinase enzymes which destroy the cell wall of the disease-causing pathogenic fungi or bacteria resulting in suppression of pathogenic load.
Product Description: Multiplex Nisarga also helps in Controlling seeds and soil-borne fungal diseases like root rot, damping-off, fungal wilts, etc., occurring in vegetables, fruit crops, field crops, pulses and plantation crops. Multiplex Nisarga Effectively controls Ganoderma wilts in Arecanuts and Coconuts.
Dosage:
For liquid based: use Multiplex Nisarga Liquid 1 liter / acre.
For Carrier based: use Multiplex Nisarga Powder 4 kg/ acre
Technical Content: Multipelx METARHIZIUM Liquid Contains Metarhizium anisopliae
Mode of Action: Contact
Product description: Multiplex Metarhizium, produces several secondary metabolites acting as mycotoxins (Insecticidal toxins) .One such Mycotoxin such a destruxin E, which is considered as next generation insecticide against many pests like Aphids, Moths and Larve.
Dosage:
Soil Application: 5 kg or 2 liters of Multiplex Metarhizium should be mixed thoroughly with 250 kg FYM in shaded area in the field and incubated for 15 days with intermittent sprinkling of water. After 15 days, the fungus enriched Farmyard manure should be used as soil application.
Foliar Spray: Mix 2 to 3 ml or 5 gm of Multiplex Metarhizium in one liter of water and spray the suspension over the pant for 2 to 3 times at 15 days intervals.
Product Description: Multiplex Samras contains 18 Types of plant Derived Amino Acids, which enhances the uptake of major, secondary and micronutrients By acting as a natural chelating agent, thus, improving flower and fruit setting and enhancing drought resistance in plants. Samras promotes enzymatic activities, protein synthesis & also increases the photosynthetic activity in plants. It also acts as Plant Bio Activator
Benefits
Enhances the uptake of major, secondary and micro nutrients by acting as natural chelating agent
Promotes enzymatic activity in the plant system
Increases the photosynthesis and enhances the protein synthesis
Improves flower & fruit setting
Controls flower & fruit dropping
Improves size, colour and keeping quality of the produce ·
Enhances the drought resistance in plants
Improves the yield both by quality and quantity
DIRECTION FOR USE :
Dissolve 2 to 3 ml of Multiplex Samras in one litre of water and spray on both surfaces of the leaves. We recommend two to three sprays starting from flower initiation at an interval of 15 to 20 days. Samras can be given through drip irrigation at the rate of one litre per acre.
Note: To get better results, it is recommended to apply it along with MULTIPLEX PROKISSAN by dissolving one gram in one litre of prepared solution. Multiplex Samras can also be used along with Multiplex Pramukh (Water soluble NPK fertilizers) at 5 gm per litre of prepared solution. This will enhance the availability of foliar applied nutrients.
Packing: Samras is available in 100 ml, 250 ml, 500 ml, 1 litre & 5 Litre packing.
Precaution: Avoid mixing of Sulphur and Copper based products along with Multiplex Samras
Product Description - Anshul Liquid Magic contains secondary nutrients like Calcium, Magnesium, Sulphur, and micronutrients like Manganese, Zinc, Copper, Iron, Boron, and Molybdenum in balanced and easily available form.
High yielding short duration variety crop will encounter more nutrients deficiency which might occur for reasons beyond the control of farmers, resulting in decreased yield in high-yielding crops. The application of Anshul Liquid Magic will initiate flowering, improves the setting up of flowers, corrects the deficiencies by eliminating the hidden hunger and develops resistance against diseases, which leads to increased yield.
Mode of Application: Foliar spray
Dosage: For field crops: Dissolve 2.5 ml Anshul Liquid Magic in one liter of water and spray on leaves. For field and vegetable crops
First spray 20-25 days after sowing/transplanting.
Second spray: 15 - 20 days after the first spray.
Third spray: before plant maturation or fruit development stage. For horticultural crops: Spray 20 - 30 days before flowering and second spray after fruit set. (i.e. when the fruit attains bean size).
Mode of Application: Multiplex Nalpak can be used in Soil Application
Product Description: Multiplex Nalpak Liquid is a blend of various beneficial bacteria like nitrogen fixers (Azotobacter and Azospirillium), phosphate solubilizers and potash mobilizers. It helps in fixing of nitrogen, solubilize and mobilize Phosphorus and potassium respectively and increases crop yield. It helps in better utilization of applied major plant nutrients.
Dosage: Use Multiplex Nalpak @ 500 ml liquid or 5 kg of powder to be mixed with 100 kg of well decomposed farm yard manure or Multiplex Annapurna and broadcast.
Mode of Application: Foliar Spray
Product Description: Multiplex Sampurna contains all essential plant nutrients like major nutrients – N, P, K; secondary nutrients–Ca, Mg, S, and micronutrients like Zinc, Manganese, Iron, Copper, Boron & Molybdenum. It contains a high quantity of magnesium & potassium and it is ideally suitable for Banana crops.
Dosage: Dissolve 2.5 ml of Multiplex Sampurna in one liter of water and spray on both surfaces of leaves.4–to 5 sprays are recommended for the banana crop. First, spray 45–50 days after transplantation. Second spray: 40 – 45 days after the first spray. The third spray: should be given as cone treatment (250 ml of solution per plant: 2.5 ml of Multiplex Sampurna /liter of water) 40 – 45 days after the second spray. Fourth spray: after 20 – 25 days of bunch initiation and Fifth spray after removing flower head.
Technical Content: Multiplex Flower Booster contains Major, secondary and nutrient, second and trace elements in easily available form.
Product Description: Multiplex Flower Booster is multi micronutrient powder fertilizer which contains essential nutrients like Mg, Ca, B, Zn etc. required for better flowering. Flower Booster increases the size and number of flowers. It maintains the original color, aroma and keeping quality of cut flowers after harvest, which includes other flowers in general.
Dosage: Use Multiplex Flower Booster 4 gm or 4 ml per liter of water.
Product Description
Multiplex Pramukh is a 100% water soluble NPK fertilizer and contains Nitrogen(N), Phosphorous(P), Potassium(K), in the ratio of 19:19:19. Hence, it is easily available to the plants. Its foliar spray helps in immediate absorption thereby increasing the yield and quality of produce. It also helps in drought resistance. Pramukh also helps in improving reproductive and vegetative activities in the plant system. This NPK 19 19 19 fertilizer Give Essential for vegetative growth in early stages and seed and flower formation in later stages
Chemical Composition - Pramukh NPK contains
Nitrogen as N = 19.0%,
Phosphorus as P2O5 = 19.0%,
Potassium as K2O = 19.0%
Benefits
Better Root Health and subsequent development
Keeps the environment clean
High Yield
Shiny and Healthy Fruits
More Crop per Drop
Helps in chlorophyll Development and Food Production in plants
Dose:
Foliar Spray: Dissolve 3.0 – 5.0 g per liter of water and spray on leaves.
Fertigation: Apply 2-3 kg of Multiplex Pramukh per acre through drip irrigation.
Packing Available : 250g, 500g, 1kg, 25kg
Technical Content: Syngenta Thionutri contains Sulphur 80% WDG
Mode of Action: Contact Fungicide
Product Description: Thionutri contains Sulphur 80% WDG it has a dual mode of action. It as a contact fungicide and as a secondary nutrient it nourishes the plant growth and development. It is very effective for control of Powdery mildew in mango.
Dosage: Dissolve Thionutri1-2gm/ltr of water for spray
Product Description
BASF Merivon Fungicide is a broad-spectrum systemic fungicide that is effective against a variety of diseases in a wide range of crops. It is a combination of Xemium and pyraclostrobin, two active ingredients that work together to provide long-lasting protection against diseases.
Active Ingredients
Xemium is a strobilurin fungicide that works by inhibiting the mitochondrial electron transport chain in fungi. This inhibition leads to the death of the fungus.
Pyraclostrobin is a QoI fungicide that works by inhibiting the 14-alpha-demethylase enzyme in fungi. This inhibition prevents the production of ergosterol, which is a vital component of fungal cell membranes. The disruption of the fungal cell membrane leads to the death of the fungus.
Mode of Action
BASF Merivon Fungicide is a combination of Xemium and pyraclostrobin in Merivon provides a synergistic effect, meaning that the two active ingredients work together to provide better control of diseases than either one would on its own.
Xemium is a strobilurin fungicide that works by inhibiting the mitochondrial electron transport chain in fungi. This inhibition leads to the death of the fungus.
Pyraclostrobin is a QoI fungicide that works by inhibiting the 14-alpha-demethylase enzyme in fungi. This inhibition prevents the production of ergosterol, which is a vital component of fungal cell membranes. The disruption of the fungal cell membrane leads to the death of the fungus.
Benefits
BASF Merivon Fungicide is a Broad-spectrum control: It is a broad-spectrum fungicide, which means that it can control a variety of diseases. This makes it a versatile tool for protecting crops from a wide range of pests.
Effective against a variety of diseases: Merivon is effective against a variety of diseases, including:
Powdery mildew
Leaf spot diseases
Rusts
Anthracnose
Scab
Alternaria leaf blight
Target spot
Long-lasting protection: Merivon provides long-lasting protection against diseases. This means that you can apply it once and be confident that your crops will be protected for a period of time.
Safe and easy to use: BASF Merivon Fungicide is safe and easy to use. It is a water-soluble concentrate that can be applied by ground or aerial application.
Cost-effective: Merivon is a cost-effective way to protect crops from diseases. It is a relatively inexpensive product, and it can be used to protect a large area.
Crop
Disease
Dosage (mL/ha)
Apples
Scab
150-250
Grapes
Powdery mildew
100-200
Citrus fruits
Alternaria leaf spot
150-250
Vegetables
Powdery mildew
100-200
Ornamentals
Anthracnose
150-250
It is important to note that these are just general guidelines, and the specific dosage and application rate may vary depending on the crop, the severity of the disease, and the environmental conditions. It is always best to consult the product label for specific instructions.
Product Description - Anshul Navras enhances the uptake of major, secondary and micronutrients by acting as a natural chelating agent, thus, improves flower and fruit setting and enhances drought resistance in plants. It promotes enzymatic activities, protein synthesis & also increases the photosynthetic activity in plants
Technical Content - Anshul Navras Contains a mixture of 18 natural amino acids, extracted from plant source.
Mode of Application: Foliar spray
Benefits
Enhances the uptake of major, secondary and micro nutrients by acting as natural chelating agent
Promotes enzymatic activity in the plant system
Increases the photosynthesis and enhances the protein synthesis
Improves flower & fruit setting
Controls flower & fruit dropping
Improves size, colour and keeping quality of the produce · Enhances the drought resistance in plants · Improves the yield both by quality and quantity
Dosage: Dissolve 2 to 3 ml of Navras in one litre of water and spray on both surfaces of the leaves. We recommend two to three sprays starting from flower initiation at an interval of 15 to 20 days. Anshul Navras can be given through drip irrigation at the rate of one liter per acre
Technical Content: Metarhizium anisopliae
Mode of Action: Contact
Product description: Multiplex Metarhizium produces several secondary metabolites acting as mycotoxins (Insecticidal toxins) .One such Mycotoxin such a destruxin E, which is considered as next generation insecticide against many pests like Aphids, Moths and Larve.
Dosage:
Soil Application: 5 kg or 2 liters of Multiplex Metarhizium should be mixed thoroughly with 250 kg FYM in shaded area in the field and incubated for 15 days with intermittent sprinkling of water. After 15 days, the fungus enriched Farmyard manure should be used as soil application.
Foliar Spray: Mix 2 to 3 ml or 5 gm of Metarhizium in one liter of water and spray the suspension over the pant for 2 to 3 times at 15 days intervals.
Mode of Application : Multiplex Multimax can be used for both Foliar spray and Fertigation
Product Description : Multiplex Multimax is a multi micronutrient fertilizer which contains mixture of chelated and partially chelated nutrients. Multimax helps in correcting the deficiency of nutrients at critical stage of growth and helps in seed and fruit set, thus increases yield. Multiplex Multimax is completely water soluble Micronutrient Mixture and can be used for Plant Nutrition
Dosage : Use Multimax for Foliar Spray - 3.0 g per litre of water.
Use Multimax for Fertigation: 2 - 3 kg per acre.
Mode of Application: Foliar Spray
Product Description: Multiplex Multimag is a micronutrient fertilizer available in crystalline form and contains Magnesium 9.6% in form of magnesium sulphate, which is 100 % water soluble fertilizer.
Dosage: Foliar application - Use Multiplex Multimag 3 to 5 g per liter of water, Soil Application - 20 to 25 Kg per acre, Plantation crops - 150-200 g per tree per palm.
Mode of Application: Foliar Spray
Anshul Full power contains essential plant nutrients (Major, Secondary and Micronutrients). Most of the nutrients are in chelated form.
Dosage: Dissolve 2-2.5 ml of Anshul Full Power in one liter of water and spray on both surfaces of the leaves. First, spray 30 - 35 days after germination. Second, spray 15 days after the first spray.
BASF Systiva Fungicide Contains Fluxapyroxad 33.3% w/v
Benefits: BASF Systiva Fungicide offers effective control of all the major seed-borne and soil-borne diseases like Aspergillus in Groundnut and Black Scurf in Potato which ensures a disease-free start. It provides long-lasting protection thereby ensuring uniform germination & more plant population in Groundnut.
Dosage: For Ground nut use Systiva Fungicide 1 ml/kg seeds,
For Potato, Use Systiva 6 ml/kg seeds
Mode of Application: Foliar spray
Product Description: Multiplex MagZinc+ is a Multi Micronutrient Liquid Fertilizer. MagZinc+ Keeps the plant healthy, improves drought and disease resistance in plants. It helps in uniform maturity, size, colour, shape and enhances sweetness in fruits. Improves the yield both by quality and quantity.
Dosage: Use Multiplex Magzinc+ 2-3 ml/Liter for Foliar Spray
Mahadhan 19:19:19 Fertilizers is a water-soluble, balanced fertilizer that provides all three major nutrients (nitrogen, phosphorus, and potassium) in equal proportions. It is a good source of all three forms of nitrogen (amide, ammoniacal, and nitrate), making it a versatile fertilizer that can be used for a variety of crops.
Mahadhan 19:19:19 Fertilizers is a starter grade fertilizer, which means that it is ideal for use at the beginning of the growing season to help crops establish a strong root system and promote early growth. It can also be used throughout the growing season to maintain plant health and productivity.
This fertilizer is easy to use and can be applied through a variety of methods, including drip irrigation, foliar application, and broadcasting. It is also relatively affordable, making it a cost-effective way to boost crop yields.
Benefits of using Mahadhan 19:19:19 Fertilizers:
Provides all three major nutrients in equal proportions
A good source of all three forms of nitrogen
Ideal for use as a starter fertilizer
Can be used throughout the growing season
Easy to use and apply
Affordable
Suggested use:
Apply 1-2 kg per 100 square meters at the beginning of the growing season.
Apply 0.5-1 kg per 100 square meters every 2-3 weeks during the growing season.
Adjust the application rate as needed based on the specific crop and growing conditions.
Caution:
Do not apply this fertilizer to dry foliage.
Do not apply this fertilizer in excess, as this can damage plants.
Multiplex Garden Mixture is multi micronutrient fertilizer which Contains major, secondary and micro-nutrients required for Better Plant Growth and acts as best garden Fertilizer and source of complete plant food.
Benefits of using Multiplex Garden Mixture :
• Garden Mixture Provides Essential nutrients for plant growth and development.
• Provides balance nutrition to plants,
• Multiplex Garden Mixture Improves plant growth on yield,
• Resistance against pest &diseases.
• Enhances aesthetics of the plants following with an increase in flowering and fruiting.
Mode of Application: Foliar spray
Product Description: Multiplex Neel Cu is a Chelated micronutrient fertilizer containing copper 12% in EDTA form. Copper helps in enzymatic activity (ascorbic acid oxidase & other oxidase enzymes). It helps in chlorophyll formation, N-fixation, protein and carbohydrate metabolism. It also helps in maintaining the integrity of the cell wall. It helps to kill the fungal spores detrimental to plants.
Dosage: Use Multiplex Neel Cu 0.5 g per liter of water
Shine + is a liquid fertilizer containing higher concentrations of Calcium and Boron along with other nutrients in easily available form. Contains calcium 11%.
Mode of Application: Foliar Spray:Shine was developed exclusively for foliar spray.
Benefits:
Calcium is an essential nutrient that is required by plants for healthy growth and development.
Calcium is a major constituent of the cell walls, helps in pollen tube development, growth, health, and the setting up of flowers and flowers.
Almost all field, oilseeds, and plantation crops require more quantities of calcium for completion of their life cycle as well as for improving yield both by quality and quantity.
Fruits and vegetables like potato, Tomato, Brinjal, Cauliflower, Cabbage, Cucurbits, Pumpkin, Apple, Watermelon, Papaya, Mango, require more quantity of calcium along with other nutrients.
Dosage:
Drip Irrigation:Mix 2 litres of Shine + in 200 litres of water & Feed through drip system ( 2 applications is required for a cropping season)
Foliar spray: Dissolve 2 to 3ml of Anshul Shine + in 1 litre of water and spray on both sides of leaves & fruits.2 to 3 sprays are required depending upon the crop at an interval of 20-30 days between the sprays
Technical Content: Contains Calcium, Magnesium, Sulphur, Zinc, Iron, Manganese, Copper, Boron, and Molybdenum.
Mode of Application: Foliar spray
Product Description: Anshul Vegetable Special helps in healthy plant growth, which will help the plant to be more tolerant to diseases. It also helps in better fruit setting, resulting in better quality produce & higher yield.
Dosage: Dissolve 2.5 g in one liter of water and spray on both the surfaces of leaves. At least 3 sprays at an interval of 20 days during the cropping season.
For Leafy vegetables: 25 days after transplantation,
For Non-leafy vegetables: When the plant is at 5-6 leaf stage.
Beans-pre-flowering stage (About 15 days after germination), Onion and Garlic: 20 - 25 days after germination.
Mode of Application:Foliar spray
Compatibility: Anshul Sulphur Liquid Fertilizer is not compatible with all pesticides. Hence take precautions. However, compatibility with DDVP and Monocrotophos formulations is found to be good.Benefits: Anshul Sulphur Liquid Fertilizer keeps the plant healthy and vigorous and thus increases the yield and quality of produce. It induces frost resistance in winter crops and also disease and pests.
Dosage:Mix 2.5 ml in a litre of water and spray on plants either in the morning or in the evening.
NOTE: In sulphur deficient plants, younger leaves turn yellowish-green or chlorotic. Shoot growth is restricted and the diameter of the stem is reduced.
Mode of Application:Foliar spray
Product Description: Anshul Magnesium contains Magnesium Sulphate (9.5 % Magnesium)Note: Magnesium deficiency occurs in areas with high rainfall or wet regions, especially in light and acid soils.Benefits: Magnesium is the central atom of chlorophyll. Magnesium is necessary to achieve high concentrations of starch in potatoes, sugar beet and fats in oilseeds.
Dosage Foliar Spray:Dissolve 3.0 - 5.0 g of Anshul Magnesium in one liter of water. First spray 20 - 25 days aftertransplantation. Repeat another two sprays at an interval of 10 - 15 days and give 2-3 sprays during cropping seasons. In the case of cotton 3 sprays are helpful in controlling red leaf disease.
Syngenta Graliz is a broad spectrum bactericide and one shot solution that uses a mixture of 2 active ingredients of strong proven performance against bacterial diseases.
With its Contact & Systemic Action, when Graliz is applied in timely basis to the growing plant in the right dosage, it provides protection from major bacterial diseases like Leaf spots & blights etc. .
Mode of Application: Foliar Spray, Fertigation
Product Description: Multiplex Twin is 100% water-soluble fertilizer and contains Nitrogen (13%) & Potassium (45%).It is suitable for fertigation and foliar spray and can be used for correcting N & K deficiency symptoms. Twin can be used for all crops.
Dosage :
For foliar spray, dissolve Multiplex Twin @ 3–4g/liter of water.
For Fertigation apply Multiplex Twin @ 4 -5 kg/acre on all crops.
Technical Content: Major, Secondary and Micronutrients
Anshul Zinc Max Contains Zinc sulphate 21.0 %.
Mode of Application: Foliar Spray
Benefits: Zinc promotes growth hormones & starch formation. It promotes seed maturation & production. It is required by several enzyme systems & auxins & in protein synthesis. It also improves disease resistance in plants.
Dosage :
Soil Application: Apply minimum 5.0 kg per acre at the time of sowing or transplanting. For horticulture crops, apply 50 - 75 g per tree/ palm, once in six months.Foliar Application: Dissolve 3.0 g in one liter of water and spray on both surface of the leaves.
Technical Content: Topramezone 33.6 % SC
Application Method
ELITE should be applied at 2-5 leaf stage of the weeds.
ELITE should be applied in combination with SOLARO & OUTRIGHT. Combined application of ELITE+ SOLARO gives synergistic effects. ELITE+ SOLARO stock solution should be prepared before application.
ELITE should be applied under moist field conditions using flat fan nozzle.
Benefits
Effectively kills all major narrow & broad leafy weeds of corn.
Completely safe for all the corn species at all the growth stages.
Reduces Crop Weed Competition by killing all major weedsYield increases & cost of cultivation reduces
Dosage : Use PI Elite 75 to 100ml(25.2 to 33.6 g a.i.)+ MSO adjuvant @2ml/L water per hectare.
Syngenta Polo® provides powerful control against aphids and whiteflies. It gives immediate crop protection through permanent feeding inhibition. Formulated with the active ingredient Diafenthiuron and suspension concentrate provides consistent biological efficacy.
Technical Content: Syngenta Polo Insecticide contains Diafenthiuron 50% W
Target Pests / Insects: Cotton - Whitefly, Thrips, Aphids and Jassids, Cabbage-Diamond Black Moth, Chilli-Mites, Brinjal-Whitefly, Cardamon-Thrips, Capsule Borer
Major Crops: Cotton, Cabbage, Chilli, Brinjal, Cardamon
Dosage: 250GM / Acer
Technical Content: Anshul Calcimax Contains Calcium 18.8 % and Nitrogen 15.5 %
Mode of Application: Foliar spray and Soil application
Product Description: Application of Calcimax helps in controlling bitter pit disease in apples, spongy tissue in mango, fruit cracking in lemon and other fruit crops. It also helps to increase the shelf life of fruits.
Dosage: Foliar spray: Dissolve 4.0 - 5.0 g of Anshul Calcimax in one liter of water and spray on both the surfaces of leaves.
Spray at least 2-3 sprays during the cropping season.
Soil application: Apply 25 kg of Anshul Calcimax per acre, in 5 split doses.
BASF Librel® Zn is a micronutrient fertilizer, which contains 14% chelated Zinc in powder form which is highly soluble in water. Librel Zn is mainly used to correct zinc deficiency in crops and as a micronutrient source in growing media. Librel Zn, an EDTA micronutrient is best and easy available form of micronutrient.
Compatibility : Compatible with many crop protection chemicals.
Liberal chelates give best results when crops have adequate supplies of water and major nutrients and are not under stress for any other reason. Conditions which are resonable for one particular deficiencies of other micronutrient. Always ensure that deciencies of other micronutrient. Always ensure that deficiencies are confirmed before treatment is carried out. Never exceed the recommended application rate. It is highly soluble chelated form of zinc which is an essential element for plant growth.
