Vegetables

Sarpan Sarker Chilli Seeds are a popular choice for both home and commercial growers. These seeds produce high yields of dark green, glossy-shiny chilies that are 7-9 cm long and have a high pungency. They are prolific bearers and are tolerant to a variety of diseases.  Key features:  High Yield: These seeds produce a large number of chilies per plant.  Glossy-shiny: The chilies are dark green and have a glossy shine.  7-9 cm long: The chilies are medium-sized and are perfect for use in a variety of dishes.  High Pungency: These chilies are very hot and have a Scoville Heat Unit (SHU) rating of 2500-15000.  Prolific Bearer: The plants are very productive and will continue to produce chilies throughout the season.  Tolerant to Diseases: The plants are resistant to a variety of diseases, making them a good choice for growers in all climates.  All Season: These seeds can be planted year-round.  Here are some tips for growing Sarpan Sarker Chilli Seeds:  Start the seeds indoors 6-8 weeks before the last frost.  Transplant the seedlings outdoors after the last frost.  Plant the seedlings in full sun.  Water the plants regularly.  Fertilize the plants every few weeks.  Harvest the chilies when they are red and ripe.     Land Preparation:    Number of ploughings: 2-3 ploughings are generally recommended to achieve a fine tilth.   Depth of ploughing: The first ploughing should be deep (18-20 cm) to break the hardpan and improve drainage. Subsequent ploughings can be shallower (10-12 cm).   Timing: Ploughing is best done during the summer months (April-May) to allow the soil to dry and aerate.   Moisture content: Ideally, the soil should have moderate moisture content during ploughing. Avoid ploughing when the soil is too wet or dry.   After ploughing, remove all weeds, stones, and other debris from the field. This will prevent competition for resources and facilitate smooth land leveling.   Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.   Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.   Apply a basal dose of fertilizers based on soil test recommendations. A general recommendation is 40 kg nitrogen, 60 kg phosphorus, and 40 kg potassium per acre.    Sowing   Sow  Sarpan Sarker Chilli seeds in a well-drained seedbed with fertile soil.   Sow seeds thinly, about 2-3 cm (about 1.18 in) apart.   Cover the seeds lightly with soil.   Water the seedbed regularly and keep it moist.   Sarpan Sarker Chilli Seedlings should emerge in 7-10 days.    Transplanting:    Transplant Sarpan Sarker Chilli seedlings to the field when they are 4-5 weeks old and have 4-5 true leaves.   Harden off seedlings for a week before transplanting by gradually exposing them to outdoor conditions.   Prepare the field by tilling, leveling, and making planting holes.   Space the plants 45-60 cm apart in rows that are 60-75 cm apart.   Make sure the roots are not bent when planting.   Water the plants thoroughly after transplanting.    Harvesting:   Sarpan Sarker are ready for harvest when they reach full color and size.   Ripe Sarpan Sarker Chilli  Use sharp scissors or pruners to harvest the chilies.   Cut the stem about 1 cm above the fruit.   Harvest chilies regularly, as this will encourage further fruiting.   Storage:   Fresh Chilli can be stored in the refrigerator for up to 2 weeks.   Sarpan Sarker Chilli stored in refrigerator   Wash chilies gently before storing them.   Place  Chilli in a plastic bag and remove as much air as possible.   Alternatively, chillies can be dried or frozen for longer storage.   Drying of Sarpan 4444 Chilli  :   Wash chillies and remove stems.   Slice chilies into thin strips or leave them whole.   Spread chilies on a clean drying rack or trays in a well-ventilated area.   Drying chillies   Turn chilies regularly to ensure even drying.   Chillies are dry when they are brittle and break easily. 

Read more less

Sarpan 4444 Chilli Seeds is a high-yielding, hybrid chilli variety that is popular among farmers for its high pungency, attractive dark green glossy fruits, and resistance to diseases. It is a vigorous plant with a bushy and elastic growth habit. The fruits are long, measuring 7-8 cm long and 0.8-1.2 cm in breadth. They mature in 55-60 days for fresh green harvest and 90-100 days for red harvest.  Key features   High-yielding variety  Attractive dark green glossy fruits  Long fruits (7-8 cm)  High pungency  Resistant to diseases  Vigorous plant with a bushy and elastic growth habit  Matures in 55-60 days for fresh green harvest and 90-100 days for red harvest  Benefits   High yield of chillies  Attractive and marketable fruits  Sarpan 4444 Chilli Seeds is High pungency, ideal for making chilli powder and other spicy products  Resistant to diseases, which reduces the need for pesticides  Vigorous plant that is easy to grow  Short maturity period, allowing for multiple harvests in a season     Land Preparation:    Number of ploughings: 2-3 are generally recommended to achieve a fine tilth.   Depth of ploughing: The first ploughing should be deep (18-20 cm) to break the hardpan and improve drainage. Subsequent ploughings can be shallower (10-12 cm).   Timing: Ploughing is best done during the summer months (April-May) to allow the soil to dry and aerate.   Moisture content: Ideally, the soil should have moderate moisture content during ploughing. Avoid ploughing when the soil is too wet or dry.   After ploughing, remove all weeds, stones, and other debris from the field. This will prevent competition for resources and facilitate smooth land levelling.   Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.   Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.   Apply a basal dose of fertilizers based on soil test recommendations. A general recommendation is 40 kg nitrogen, 60 kg phosphorus, and 40 kg potassium per acre.    Sowing   Sow Sarpan 4444 Chilli Seeds seeds in a well-drained seedbed with fertile soil.   Sow seeds thinly, about 2-3 cm (about 1.18 in) apart.   Cover the seeds lightly with soil.   Water the seedbed regularly and keep it moist.   Sarpan 4444 Chilli Seeds Seedlings should emerge in 7-10 days.    Transplanting:    Transplant Sarpan 4444 Chilli Seeds seedlings to the field when they are 4-5 weeks old and have 4-5 true leaves.   Harden off seedlings for a week before transplanting by gradually exposing them to outdoor conditions.   Prepare the field by tilling, levelling, and making planting holes.   Space the plants 45-60 cm apart in rows that are 60-75 cm apart.   Make sure the roots are not bent when planting.   Water the plants thoroughly after transplanting.    Harvesting:   Nunhems Meenal Chillies are ready for harvest when they reach full colour and size.   Ripe Sarpan 4444 Chilli Seeds   Use sharp scissors or pruners to harvest the chillies.   Cut the stem about 1 cm above the fruit.   Harvest chillies regularly, as this will encourage further fruiting.   Storage:   Fresh Chilli Seeds can be stored in the refrigerator for up to 2 weeks.   Sarpan 4444 Chilli Seeds stored in a refrigerator   Wash chillies gently before storing them.   Place Chilli Seeds in a plastic bag and remove as much air as possible.   Alternatively, chillies can be dried or frozen for longer storage.   Drying of Sarpan 4444 Chilli  :   Wash chillies and remove stems.   Slice chillies into thin strips or leave them whole.   Spread chillies on a clean drying rack or trays in a well-ventilated area.   Drying chillies   Turn chillies regularly to ensure even drying.   Chillies are dry when they are brittle and break easily. 

Read more less

The uniformly shaped white roots gives it a fleshy and crispy texture. Root Shape: Uniform Root Length: 35 - 40 cm Root Surface: Smooth, White crispy Root Flesh & Pungency : Mild Pungent Maturity : 53 - 58 days

Read more less

Sarpan Super Chilli seeds are a great choice for those who want to grow their own chilli peppers. The plants are tall, growing up to 120-130 cm, and produce long, broad-shouldered fruits that are 15-18 cm long. The chillies are cherry red in colour and have a pungency of 4000-5000 SHU. They have a highly wrinkled appearance and an acidic flavor. These chillies are suitable for irrigated cropping and are considered to be an all-season variety.  Key Features:  Tall plants (120-130 cm)  Long, broad-shouldered fruits (15-18 cm)  Cherry red color  Pungency of 4000-5000 SHU  Highly wrinkled appearance  Acidic flavor  Suitable for irrigated cropping  All-season variety  These chillies are a great addition to any garden and can be used in a variety of dishes. They can be eaten fresh, dried, or ground into powder. They can also be used to make hot sauce, salsa, and other condiments.    Land Preparation:     Number of ploughings: 2-3 ploughings are generally recommended to achieve a fine tilth.    Depth of ploughing: The first ploughing should be deep (18-20 cm) to break the hardpan and improve drainage. Subsequent ploughings can be shallower (10-12 cm).    Timing: Ploughing is best done during the summer months (April-May) to allow the soil to dry and aerate.    Moisture content: Ideally, the soil should have moderate moisture content during ploughing. Avoid ploughing when the soil is too wet or dry.    After ploughing, remove all weeds, stones, and other debris from the field. This will prevent competition for resources and facilitate smooth land leveling.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water holding capacity, and soil structure.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water holding capacity, and soil structure.    Apply a basal dose of fertilizers based on soil test recommendations. A general recommendation is 40 kg nitrogen, 60 kg phosphorus, and 40 kg potassium per acre.     Sowing    Sow of Sarpan Super Chilli seeds in a well-drained seedbed with fertile soil.    Sow seeds thinly, about 2-3 cm apart.    Cover the seeds lightly with soil.    Water the seedbed regularly and keep it moist.    Chilli  Seedlings should emerge in 7-10 days.     Transplanting:     Transplant Sarpan Super Chilli seedlings to the field when they are 4-5 weeks old and have 4-5 true leaves.    Harden off seedlings for a week before transplanting by gradually exposing them to outdoor conditions.    Prepare the field by tilling, levelling, and making planting holes.    Space the plants 45-60 cm apart in rows that are 60-75 cm apart.    Make sure the roots are not bent when planting.    Water the plants thoroughly after transplanting.     Harvesting:    Sarpan Super Chilli are ready for harvest when they reach full colour and size.    Ripe Sarpan Super Chilli      Use sharp scissors or pruners to harvest the chillies.    Cut the stem about 1 cm above the fruit.    Harvest chillies regularly, as this will encourage further fruiting.    Storage:    Fresh Chilli can be stored in the refrigerator for up to 2 weeks.    These Chilli stored in the refrigerator    Wash chillies gently before storing them.    Place Chillis in a plastic bag and remove as much air as possible.    Alternatively, chillies can be dried or frozen for longer storage.    Drying of Sarpan Super Chilli   :    Wash chillies and remove stems.    Slice chillies into thin strips or leave them whole.    Spread chillies on a clean drying rack or trays in a well-ventilated area.    Drying chillies    Turn chillies regularly to ensure even drying.    Chillies are dry when they are brittle and break easily. 

Read more less

Sarpan F1 Hybrid Chilli-132 seeds are potent variety boasts fiery chilies with a Scoville heat unit rating of 35,000-40,000, making them ideal for those who crave a real kick. Benefits:  High Yielding: Get ready for a bountiful harvest! These prolific plants produce long, slender chilies (12-14 cm) in abundance.  Fast Maturity: Enjoy fresh chilies in just 60-70 days after planting.  Versatility: Use these chilies fresh or dry them for later use. They are perfect for adding heat to curries, salsas, and sauces.  Compact and Resistant: These plants grow to a manageable height of 70-90 cm and are resistant to heat, wilt, and leaf curl.  Beautiful Appearance: The glossy, firm fruits are a vibrant yellow-green to parrot green, adding a pop of color to your garden.   Key Features:  Seeds per pack: 132  Plant type: Compact bushy  Fruit length: 12-14 cm  Fruit diameter: 1.2-1.3 cm  Fruit colour: Yellow-green to parrot green  Scoville heat units: 35,000-40,000  Days to maturity: 60-70  Suitable for: Fresh or dried use  Resistant to: Heat, wilt, and leaf curl     Land Preparation:     Number of ploughings: 2-3 ploughings are generally recommended to achieve a fine tilth.    Depth of ploughing: The first ploughing should be deep (18-20 cm) to break the hardpan and improve drainage. Subsequent ploughings can be shallower (10-12 cm).    Timing: Ploughing is best done during the summer months (April-May) to allow the soil to dry and aerate.    Moisture content: Ideally, the soil should have moderate moisture content during ploughing. Avoid ploughing when the soil is too wet or dry.    After ploughing, remove all weeds, stones, and other debris from the field. This will prevent competition for resources and facilitate smooth land leveling.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water holding capacity, and soil structure.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water holding capacity, and soil structure.    Apply a basal dose of fertilizers based on soil test recommendations. A general recommendation is 40 kg nitrogen, 60 kg phosphorus, and 40 kg potassium per acre.     Sowing    Sow of Sarpan F1 Hybrid Chilli-132 Chilli seeds in a well-drained seedbed with fertile soil.    Sow seeds thinly, about 2-3 cm apart.    Cover the seeds lightly with the soil.    Water the seedbed regularly and keep it moist.    Sarpan F1 Hybrid Chilli-132  Chilli Seedlings should emerge in 7-10 days.     Transplanting:     Transplant Sarpan F1 Hybrid Chilli-132 Chilli seedlings to the field when they are 4-5 weeks old and have 4-5 true leaves.    Harden off seedlings for a week before transplanting by gradually exposing them to outdoor conditions.    Prepare the field by tilling, levelling, and making planting holes.    Space the plants 45-60 cm apart in rows that are 60-75 cm apart.    Make sure the roots are not bent when planting.    Water the plants thoroughly after transplanting.     Harvesting:    Sarpan F1 Hybrid Chilli-132  Chillis are ready for harvest when they reach full colour and size.    Ripe Sarpan F1 Hybrid Chilli-132  Chilli  Use sharp scissors or pruners to harvest the chillies.    Cut the stem about 1 cm above the fruit.    Harvest chillies regularly, as this will encourage further fruiting.    Storage:    Fresh Sarpan F1 Hybrid Chilli-132 Chilli can be stored in the refrigerator for up to 2 weeks.    Sarpan F1 Hybrid Chilli-132 Chilli stored in refrigerator    Wash chillies gently before storing them.    Place Sarpan F1 Hybrid Chilli-132 Chillis in a plastic bag and remove as much air as possible.    Alternatively, chillies can be dried or frozen for longer storage.     Drying of Sarpan F1 Hybrid Chilli-132 Chilli :    Wash chillies and remove stems.    Slice chillies into thin strips or leave them whole.    Spread chillies on a clean drying rack or on trays in a well-ventilated area.    Drying chillies    Turn chillies regularly to ensure even drying.    Chillies are dry when they are brittle and break easily. 

Read more less

Sarpan Avinash Chilli Seeds is a hybrid chilli variety known for its high yield and resistance to diseases. The fruit is 5-6 cm long, glossy, firm, and has a medium to high pungency. It is suitable for growing in all seasons and is recommended for the states of Uttar Pradesh, Bihar, Jharkhand, Assam, Chhattisgarh, Odisha, West Bengal, Madhya Pradesh, and Maharashtra.  Benefits:  High Yield: These seeds produce a high yield of chillies, making them ideal for commercial production or home gardeners who want to harvest a plentiful crop.  Disease Resistance: They are highly tolerant to various sucking pests and diseases, reducing the need for pesticides and ensuring a healthy harvest.  Suitable for All Seasons: Unlike some chilli varieties, Sarpan Avinash chillies can be grown year-round in various climates, offering a longer harvesting season.  Medium to High Pungency: These chillies provide a good level of spice, making them suitable for adding heat to various dishes.  Glossy and Firm Fruit: The chillies are visually appealing with their glossy and firm appearance, ensuring marketability and adding a vibrant touch to dishes.  Nutritional Value: Chillies are a good source of vitamins A and C, which are essential for maintaining good health.  Key Features:  High Yield: Produces a significantly higher yield than other chilli varieties.  Disease Resistance: Highly tolerant to various pests and diseases, minimizing the need for pesticides.  Suitable for All Seasons: Adaptable to different climatic conditions and can be grown year-round.  Medium to High Pungency: Offers a desirable level of spice for diverse culinary uses.  Glossy and Firm Fruit: Boasts visually appealing chillies with a firm texture, enhancing their market value and culinary presentation.  High Germination Rate: Ensures a successful harvest with a higher percentage of seeds germinating into healthy plants.  Upright Plant Growth: Facilitates easier management and maintenance of the chilli plants.    Land Preparation:     Number of ploughings: 2-3 ploughings are generally recommended to achieve a fine tilth.    Depth of ploughing: The first ploughing should be deep (18-20 cm) to break the hardpan and improve drainage. Subsequent ploughings can be shallower (10-12 cm).    Timing: Ploughing is best done during the summer months (April-May) to allow the soil to dry and aerate.    Moisture content: The soil should have moderate moisture content during ploughing. Avoid ploughing when the soil is too wet or dry.    After ploughing, remove all weeds, stones, and other debris from the field. This will prevent competition for resources and facilitate smooth land levelling.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.    Incorporate well-decomposed farmyard manure (FYM) or compost at 15-20 tons per acre at the time of final ploughing. This improves soil fertility, water-holding capacity, and soil structure.    Apply a basal dose of fertilisers based on soil test recommendations. A general recommendation is 40 kg nitrogen, 60 kg phosphorus, and 40 kg potassium per acre.     Sowing    Sow Chilli seeds in a well-drained seedbed with fertile soil.    Sow seeds thinly, about 2-3 cm apart.    Cover the seeds lightly with the soil.    Water the seedbed regularly and keep it moist.    Sarpan Avinash  Chilli Seedlings should emerge in 7-10 days.     Transplanting:     Transplant Sarpan Avinash Chilli seedlings to the field when they are 4-5 weeks old and have 4-5 true leaves.    Harden off seedlings for a week before transplanting by gradually exposing them to outdoor conditions.    Prepare the field by tilling, levelling, and making planting holes.    Space the plants 45-60 cm apart in rows 60-75 cm apart.    Make sure the roots are not bent when planting.    Water the plants thoroughly after transplanting.     Harvesting:    Chillis are ready for harvest when they reach full colour and size.    Ripe Sarpan Avinash Chilli  Use sharp scissors or pruners to harvest the chillies.    Cut the stem about 1 cm above the fruit.    Harvest chillies regularly, as this will encourage further fruiting.    Storage:    Fresh chilli can be stored in the refrigerator for up to 2 weeks.    These chillies are stored in the refrigerator    Wash chillies gently before storing them.    Place Sarpan Avinash Chillis in a plastic bag and remove as much air as possible.    Alternatively, chillies can be dried or frozen for longer storage.    Drying of Sarpan Avinash Chilli :    Wash chillies and remove stems.    Slice chillies into thin strips or leave them whole.    Spread chillies on a clean drying rack or trays in a well-ventilated area.    Drying chillies    Turn chillies regularly to ensure even drying.    Chillies are dry when they are brittle and break easily.   

Read more less