Herbicides

Tata Metri is a selective herbicide used to control annual grasses and many broadleaf weeds.Metri is used as pre- and post-emergence herbicide. Tata Metri Herbicide is a 70% WP formulation of Metribuzin.  Crops: Wheat, Soybean, Potato, Tomato & Sugarcane.Dosage: Use Tata Metri 100-120 gm/acre.

Read more less

Technical Name: Atrazine 50% WP Mode of Action: Pre and Early Post Emergent Herbicide Atrazine is a chlorinated triazine herbicide that is used to selectively control annual grasses and broadleaf weeds before they emerge. It is a systemic herbicide, which means that it is taken up by the roots and leaves of the plant and moves throughout the plant, killing it. Atrazine is registered for use on several agricultural crops, including corn, sorghum, sugarcane, wheat, macadamia nuts, and guava. It is also registered for use on non-agricultural areas, such as industrial sites and turf. Atrazine is effective against a wide range of weeds, including crabgrass, foxtail, barnyardgrass, pigweed, and johnsongrass. It is also effective against some perennial weeds, such as quackgrass and dallisgrass. Atrazine is applied to the soil as a spray or granular application. The rate of application will vary depending on the crop being treated and the weeds present. Atrazine is a relatively safe herbicide when used according to label directions. However, it can be harmful to fish and other aquatic organisms. It is important to avoid applying atrazine near water bodies. Safety Precautions Always read and follow the label directions carefully. Wear protective clothing, including gloves, long sleeves, and pants, when handling atrazine. Avoid contact with skin, eyes, and mouth. Wash thoroughly with soap and water after handling atrazine. Dispose of atrazine and its containers properly. Dosages: 400- 1600 gm per acre

Read more less

Selective and systemic post-emergence herbicide for a broad range of weeds Atul Salix 24D Herbicide is a selective and systemic post-emergence herbicide that is used to control a wide range of broadleaf weeds in various crops. It is effective against annual and perennial weeds, including but not limited to: Amaranthus spp. (pigweeds) Chenopodium spp. (goosefoots) Cirsium spp. (thistles) Convolvulus spp. (bindweeds) Erigeron spp. (fleabanes) Polygonum spp. (smartweeds) Solanum spp. (nightshades) Trifolium spp. (clovers) Active ingredient: 2,4-D sodium salt 95% SP Mode of action: Atul Salix 24D Herbicide is a systemic herbicide, meaning that it is absorbed by the leaves and roots of the target weeds and translocated throughout the plant, killing it from within. Application: Atul Salix 24D Herbicide can be applied to crops using a variety of methods, including: Foliar application: Spray the herbicide directly onto the leaves of the weeds. Basal bark application: Apply the herbicide to the lower stem of trees and shrubs. Cut stump treatment: Apply the herbicide to the cut stump of trees and shrubs. Dosage: The dosage of Atul Salix 24D Herbicide will vary depending on the type of weed being controlled, the size of the weed, and the crop being treated. Refer to the product label for specific dosage instructions. Precautions: Wear protective clothing, including gloves, long sleeves, and pants, when handling Atul Salix 24D Herbicide. Avoid contact with skin and eyes. Do not apply to crops that are stressed or suffering from drought. Do not apply to crops that are wet or dew-covered. Do not apply to crops that are within 7 days of harvest. Keep out of reach of children and animals. Benefits: Effective control of a wide range of broadleaf weeds Systemic action for long-lasting control Can be used on a variety of crops Relatively affordable

Read more less

Atul Plasto is a selective herbicide that effectively controls weeds in wheat and soybean. It is a systemic and residual herbicide that inhibits photosynthesis. Plasto is absorbed by the roots and leaves of weeds and moves throughout the plant, disrupting chlorophyll production and leading to death. Plasto is a pre-emergence and post-emergence herbicide that can be applied to fields before or after weeds have emerged. It is effective against a wide range of broadleaf weeds, including Borreria spp., Cyperus esculentus, Cyperus campestris, Digitaria spp., and Eragrostis spp. Benefits: Effective control of broadleaf weeds in wheat and soybean Systemic and residual action for long-lasting control Pre-emergence and post-emergence application Safe for use in wheat and soybean crops Active Ingredient: Metribuzin 70% WP Application: Apply Plasto at a rate of 250-500 g/ha. Apply Plasto as a pre-emergence or post-emergence herbicide. Apply Plasto in a spray volume of 200-400 L/ha. Precautions: Do not apply Plasto to waterlogged soils. Do not apply Plasto to crops that are stressed or damaged. Wear protective clothing when handling Plasto. Keep Plasto out of reach of children. Storage: Store Plasto in a cool, dry place. Dispose of Plasto in accordance with local regulations.

Read more less

Product Description Tata Atrataf is a pre-emergence herbicide formulated as a Wettable Powder (WP) containing 50% Atrazine. It is designed to effectively control a wide range of annual grasses and broad-leaved weeds in various crops. Technical Content Active Ingredient: Atrazine 50% WP Mode of Action Atrataf works by inhibiting photosystem II, a key component in plant photosynthesis. This disruption leads to the death of germinating weed seedlings. Benefits Effective control of annual grasses and broad-leaved weeds Long-lasting residual activity Safe to target crops when applied as per recommendations Improves crop yield and quality Cost-effective weed management solution Targeted Crops & Pests/Diseases Atrataf is primarily used for weed control in: Maize Sugarcane Sorghum Coffee Grapevine Oil palm Banana Pineapple Guava It effectively targets annual grasses and broad-leaved weeds such as: Trianthema monogyna Digera arvensis Echinochloa spp Eleucine Spp Xanthium strumarium Brachiaria Spp Digitaria Spp Amaranthus viridis Polygonum spp Cleome viscose Dosage & Application The recommended dosage of Atrataf varies depending on the crop, soil type, and weed pressure. Please refer to the product label for specific instructions. Generally, the application rate ranges from 400-500 grams per acre. Method of Application Atrataf is applied as a pre-emergence herbicide, meaning it should be applied before weed emergence. It is typically applied uniformly over the crop area using ground or aerial equipment. Compatibility Atrataf is generally compatible with most fertilizers and pesticides. However, it is always recommended to conduct a small-scale compatibility test before mixing with other products. Manufacturing & Marketing Company Tata Atrataf is manufactured and marketed by Tata Rallis India Limited, a leading agrochemical company. Disclaimer: This information is intended for general knowledge and informational purposes only. Always read and follow the product label instructions carefully before using Atrataf.

Read more less

Syngenta Adrino is a a selective, systemic and contact herbicide which works for the control of weeds in sugarcane, potato, tomato, soybean and wheat. It acts through the roots and leaves and therefore, can be used for both pre and post emergence applications. It controls both narrow and broad leaf weed It works when used as pre emergence; it is essential that the soil is clad less and has sufficient moisture. Due to its broad spectrum usage and low dose/acre its extremely economical along with leaving no residual effect on the succeeding crop Recommended Crop Sugarcane, Potato, Tomato, Soybean And Wheat Recommended Doseage Soybean: 200-300 Gm/acre, Wheat: Medium Soil-100 Gm/acre, Potato : 300 Gm /acre Tomato 300gm /acre. Method Of Application: Foliar Spray. For Domestic Use Take 2 Gram Per Liter Water. gm

Read more less

Indofil Chase Herbicide is a selective, post-emergent herbicide used to control a wide range of grasses and broadleaf weeds in sugarcane, potato, tomato, wheat, and soybean crops. It is a systemic herbicide, which means that it is absorbed by the leaves and roots of the weeds and translocated throughout the plant, killing it. Dosage: Sugarcane: 1.5-3.0 kg/ha, applied pre-emergence at first wapsa condition for 3-5 days after planting or post-emergence 25-30 days after planting. Potato: 0.750 kg/ha, applied pre-emergence at first wapsa condition for 3-4 days after planting or post-emergence between emergence and time when the first potato plant has reached height of 5 cm. Tomato: 0.750 kg/ha, applied pre-planting week before transplanting or post-planting 15 days after transplanting. Wheat: 0.250-0.30 kg/ha, applied post-emergence 35 days after sowing of crop. Soybean: 0.50-0.75 kg/ha, applied post-emergence 20-30 days after planting. Safety precautions: Wear protective clothing and eyewear when handling Indofil Chase Herbicide. Do not apply the herbicide near water bodies or areas where it could run off into waterways. Dispose of unused herbicide properly.

Read more less